Easy to work with and reliable, these Wavefront sensors rotation stages enable perfect alignment for our family of Wave-Front Sensors. A must-have to ensure high-quality and repeatable measurements.

Rotation stages θxθy for HASO4 family of WFS

The  rotation stages enables the reliable alignment of a HASO wavefront sensor in an optical setup. Two degrees of freedom (tip and tilt) allow for the rotation of the sensor around the microlens plane.

Specifications

– ±4 degrees of precision tip and tilt adjustment

– 1/4″-80 TPI (threads per inch) adjuster screws

– 5 mrad/rev of adjustment per revolution

– 1.1 kg maximum load

Versatile Wavefront sensors Rotation stages

This rotation stage is designed to facilitate the optical alignment of HASO4 and HASO3 128GE2 wavefront sensors, HASO4 R-Flex50 and Mirao52e deformable mirror.

Tip-tilt and Rotation stage θxθy. The rotation axis is close to the microlenses, allowing a pure rotation.

Wavefront sensors rotation stages specifications

– Manual rotation stage

– 3 axes : tip, tilt and rotation

– ±3° adjustment range each axis

– 1° travel range of tip/tilt and 1.7° travel range of rotation per knob rotation

– 500g maximum load capacity

5 axis Tip/Tilt/Translation Stages for HASO4 R-Flex50

The second generation of 5-axis rotation stage for easy alignment of HASO4 R-Flex50 VIS and NIR.

Users appreciate the compactness, the stage locks, and the robust stability.

Tip/Tilt/XYZ Translation ± 10° Coarse 360°, Fine ± 5° ± 6.5 mm ± 5.0 mm Manual 3.5 kg